Usulan Perbaikan Tata Letak Bagian Proses Produksi pada PT. X Menggunakan Metode SLP dan Craft

Fidea Rahma; Andika Rendra Al-Ghoffard; Firly Arviani Yasla; Tiaradia Ihsan

doi:10.55681/sentri.v5i1.5600

Authors

Fidea Rahma Universitas Widyatama
Andika Rendra Al-Ghoffard Universitas Widyatama
Firly Arviani Yasla Universitas Widyatama
Tiaradia Ihsan Universitas Widyatama

DOI:

https://doi.org/10.55681/sentri.v5i1.5600

Keywords:

Facility layout, Systematic Layout Planning (SLP), CRAFT, Material Handling Cost, Material flow

Abstract

PT X is a company engaged in the natural extract industry that still faces facility layout problems in its production process, particularly in the simplisia extract production area. The existing facility layout is not arranged according to the production process sequence and the degree of closeness between departments, resulting in inefficient material flow, long material handling distances, and increased material handling costs. This study aims to redesign the production facility layout to improve material flow efficiency and minimize material handling costs. The methods used are Systematic Layout Planning (SLP) to analyze the closeness relationships between departments through the Activity Relationship Chart (ARC) and Activity Relationship Diagram (ARD), and the Computerized Relative Allocation of Facilities Technique (CRAFT) to optimize the layout quantitatively using a From-To Chart with the support of WinQSB software. The results indicate that the proposed layout improves the production process flow and reduces material handling distance and cost compared to the initial layout. The combination of SLP and CRAFT is proven to be effective in producing a more systematic, efficient, and economical production facility layout, thereby supporting increased productivity and operational efficiency at PT X.

Downloads

Download data is not yet available.

References

H. Achsan, “Analisis perancangan tata letak fasilitas dengan metode systematic layout planning (SLP) dan computerized relative allocation of facilities techniques (CRAFT) di CV Hutama Karya Abadi,” Trends in Neuroscience and Education, vol. 1, no. 813, pp. 1–13, 2025, doi: 10.1016/j.tine.2019.100122.

I. Adiasa, R. Suarantalla, M. S. Rafi, and K. Hermanto, “Perancangan ulang tata letak fasilitas pabrik di CV Apindo Brother Sukses menggunakan metode systematic layout planning (SLP),” Performa: Media Ilmiah Teknik Industri, vol. 19, no. 2, pp. 151–158, 2020, doi: 10.20961/performa.19.2.43467.

N. Kalim and Lukmandono, “Minimalisasi biaya material handling dengan metode SLP dan material transport equipment pada perusahaan pipa baja,” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 4, no. 2, pp. 10–16, 2021.

N. Khofiyah, M. Rizki, B. Gea, T. N. Wiyatno, and Supriyati, “Evaluation of factory facility layout to improve performance efficiency using the SLP (Systematic Layout Planning) method,” Jurnal Teknologi Terapan, vol. 4, pp. 186–195, 2023, doi: 10.33379/gtech.v7i4.3269.

M. Mudhofar, H. C. Suroso, A. R. Rahadian, and L. N. Sholekhah, “Perancangan ulang tata letak fasilitas produksi dengan menggunakan metode systematic layout planning dan CRAFT untuk mengurangi biaya material handling pada PT Prima Daya Teknik,” in Prosiding Seminar Nasional Teknologi Industri Berkelanjutan III (SENASTITAN III), 2023, pp. 1–8.

A. B. Patria, B. Suhardi, and I. Iftadi, “Perancangan tata letak fasilitas menggunakan algoritma CRAFT untuk meminimasi biaya material handling,” Performa: Media Ilmiah Teknik Industri, vol. 21, no. 2, pp. 119–129, 2022.

I. Pratiwi, E. Muslimah, and D. A. Wahab Aqil, “Perancangan tata letak fasilitas di industri tahu menggunakan BLOCPLAN,” Jurnal Ilmiah Teknik Industri, vol. 11, no. 2, pp. 102–112, 2021.

A. Rachman, D. Widyaningrum, and A. W. Rizqi, “Perancangan tata letak fasilitas untuk meminimalkan jarak material handling pada pabrik pupuk organik PT Petrokopindo Cipta Selaras dengan metode ARC dan ARD,” Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, vol. 9, no. 1, p. 345, 2023, doi: 10.24014/jti.v9i1.22853.

E. Supriyadi and S. A. Srikandi, “Penerapan perancangan ulang tata letak fasilitas terhadap ongkos material handling (OMH): Systematic literature review,” Jurnal Tecnoscienza, vol. 7, no. 2, pp. 237–251, 2023, doi: 10.51158/tecnoscienza.v7i2.917.

L. Wali and Lukmandono, “Desain ulang tata letak fasilitas produksi dengan metode CRAFT untuk meningkatkan kapasitas produksi agregat,” in Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, vol. 3, 2023, pp. 98–111.