Usulan Perancangan Ulang Tata Letak Workshop Produksi Spun Pile PT. Xyz Menggunakan Metode Systematic Layout Planning (SLP) dan Metode Grafik

Beverly Jessa Surentu; Radhinka Mahsa Aziza; Militya Christy Emmanuela Melale; Tiaradia Ihsan

doi:10.55681/sentri.v5i1.5599

Authors

Beverly Jessa Surentu Universitas Widyatama
Radhinka Mahsa Aziza Universitas Widyatama
Militya Christy Emmanuela Melale Universitas Widyatama
Tiaradia Ihsan Universitas Widyatama

DOI:

https://doi.org/10.55681/sentri.v5i1.5599

Keywords:

Facility Layout, Systematic Layout Planning, Graph Method, Material Flow, Spun Pile

Abstract

Facility layout design plays an important role in improving material flow efficiency in production systems. The spun pile production workshop at PT. XYZ involves sequential processes and large, heavy materials, while the existing layout has not fully considered process sequence and material handling intensity, resulting in long material handling distances and Work in Process (WIP) accumulation. This study aims to redesign the facility layout of the spun pile production workshop at PT. XYZ using Systematic Layout Planning (SLP) and the Graph Method, and to compare the effectiveness of both methods. A descriptive quantitative approach was employed using data on facility dimensions, workstation positions, and material flow. Data analysis included evaluation of the existing layout, development of ARC, FTC, TCR, and ARD. The results show that the SLP-based layout produces a total material handling distance of 5,415.86, which is lower than the graph method layout 5,431.16 and the existing layout 5,473. Therefore, the SLP method is considered more effective in improving material flow efficiency at PT. XYZ.

Downloads

Download data is not yet available.

References

Y. Dian Putri, “Perancangan ulang tata letak fasilitas produksi dengan metode systematic layout planning dan algoritma BLOCPLAN pada PT Abad Jaya Abadi Sentosa,” Industrial Engineering Journal, vol. 10, no. 2, 2021, doi: 10.53912/iej.v10i2.xxx.

A. Jhon and Suseno, “Perancangan ulang tata letak fasilitas menggunakan metode SLP dan algoritma CRAFT pada CV Andi Offset,” Jurnal Sains Student Research, vol. 2, pp. 470–485, 2024, doi: 10.61722/jssr.v2i4.2023.

N. A. Khofiyah, M. Rizki, B. Gea, T. N. Wiyatno, and Supriyati, “Evaluation of factory facility layout to improve performance efficiency using the SLP (Systematic Layout Planning) method,” G-Tech: Jurnal Teknologi Terapan, vol. 7, no. 4, pp. 1633–1642, 2023, doi: 10.33379/gtech.v7i4.3269.

D. Mufti, I. Kholidasari, and S. D. Yolanda, “Improvement of facility layout and material flow pattern in a small medium enterprise using triangle flow diagram method,” Jurnal Rekayasa Sistem Industri, vol. 12, no. 2, 2023, doi: 10.26593/jrsi.v12i2.6183.

T. Rachman, “Peningkatan efisiensi penanganan material melalui perancangan tata letak fasilitas dengan integrasi metode konvensional tata letak dan algoritma CORELAP,” 2022.

S. S. Salins, S. A. R. Zaidi, D. Deepak, and H. K. Sachidananda, “Design of an improved layout for a steel processing facility using SLP and lean manufacturing techniques,” International Journal on Interactive Design and Manufacturing (IJIDeM), vol. 18, no. 6, pp. 3827–3848, 2024, doi: 10.1007/s12008-024-01828-9.

I. M. Taufik, D. Umrah, and D. Djayaningrat, “Production layout optimization using SLP for material handling cost efficiency,” Sainteks, vol. 7, no. 2, 2025, doi: 10.37577/sainteks.v7i02.923.

J. A. Tompkins, J. A. White, Y. A. Bozer, and J. M. A. Tanchoco, Facilities Planning, 3rd ed. New York, NY, USA: John Wiley & Sons, 2003.