Perancangan Sistem Pengering Biji Kopi Hybrid Berbasis IoT Dengan Sistem Monitoring Web Real - Time

Sayid Maulana; Budi Gunawan

doi:10.55681/jige.v7i2.5906

Authors

Sayid Maulana Electrical Engineering Department, Universitas Muria Kudus, Kudus, Indonesia
Budi Gunawan Electrical Engineering Department, Universitas Muria Kudus, Kudus, Indonesia

DOI:

https://doi.org/10.55681/jige.v7i2.5906

Keywords:

Coffee Bean Dryer, Hybrid System, IoT, ESP32, Real-Time Monitoring

Abstract

This study aims to design and implement a hybrid coffee bean drying system based on the Internet of Things (IoT) with real-time web monitoring to improve the efficiency and stability of post-harvest drying. The system utilizes an ESP32 integrated with a DHT22 sensor, a moisture sensor, and a load cell to monitor environmental conditions and mass changes during drying, with data transmitted via Wi-Fi to a web dashboard with a delay of 5 seconds. The novelty of this study lies in the integration of a hybrid drying system with multi-parameter monitoring based on IoT within a single integrated platform. Experimental results show that the temperature can be maintained at 43–50 °C with a deviation of ±1.5 °C, sensor accuracy of ±0.5 °C for temperature and ±2% RH for humidity, and a load cell error of ±1–2%, with a system response time of less than 5 seconds. The drying process reduces moisture content from 55% to 12% within 18–24 hours, demonstrating that the system operates effectively, stably, and responsively in improving coffee post-harvest quality.

Downloads

Download data is not yet available.

References

Emmia Tambarta Kembaren, M. (2021) ‘Pengelolaan Pasca Panen Kopi Arabika Gayo Aceh’, 10, pp. 29–36.

Fajardiansyah, I. et al. (2025) ‘No Title’, pp. 38–47.

Maleachi, S. and Christianus, F. (2024) ‘Analisis Pengelolaan Panen dan Pasca Panen Kopi Sebagai Faktor yang Mempengaruhi Kualitas Biji Kopi Robusta di Kota Pagar Alam’, 1(7), pp. 482–488.

Nihayatun Nafisah1, Ika Noer Syamsiana*, 1, Wijaya Kusuma1, Ratna Ika Putri1, A.D.W.S. (2023) ‘Analisa Perbandingan Pengaturan Suhu Berbasis Logika Fuzzy Interferensi Sugeno dan Mamdani pada Alat Pengering Biji Kopi Comparative’, 6(November), pp. 272–288.

Noer, I. et al. (2024) ‘Implementasi Sistem Monitoring Alat Pengering Biji Kopi Berbasis IoT (Internet of Things)’, 11(1).

Nofriyanti, D. et al. (2025) ‘Web-Based Monitoring System for Automatic Coffee Drying in a Smart Dryer Dome’, 6(2), pp. 422–433. Available at: https://doi.org/10.59395/ijadis.v6i2.1416.

Novianti, R., Rahayuniati, R.F. and Suroto, A. (2023) ‘Penanganan Pascapanen Kopi Robusta Baseh Terhadap Organisme Pengganggu Tanaman : Tinjauan ( Post-Harvest Management of Robusta Baseh Coffee Against Plant Pests : Review )’, 16(2), pp. 75–84.

Pambudi, A.D. et al. (no date) ‘Monitoring Sistem Kontrol Mesin Drying Kopi Secara Real Time Berbasis IoT’.

Tiyas, A.W. et al. (2025) ‘Peningkatan Akurasi Sensor Suhu dan Kelembapan DHT11 dengan Kalibrasi Suhu Berbasis IoT pada Platform Thingspeak Improved Accuracy of DHT11 Temperature and Humidity Sensor with IoT-Based Temperature Calibration on the Thingspeak Platform’, 5(3), pp. 625–633.

Tri Budiarto, Leo Ayun, M.I.N. (2023) ‘Pemberdayaan Petani Pada Pengolahan Pascapanen Kopi Metode’, 8(1), pp. 11–20.